Further properties
Shrink on
SRM Cable Markers are usually shrink fitted using a heatgun, oven or shrink tunnel. If possible, select an 'Expanded I/D' large enough to achieve a good degree of recovery when shrunk.
Characters can be printed in single or multi-lines of any length, from once to multiple times around the sleeve, in horizontal, vertical or Variaxial ®. (Combination of horizontal and vertical formats)
Black
Red
Yellow
Green
Blue
White
Transparent
Property | Value |
| Temperature Range | -55°C to +135°C |
| Shrink Temperature | 120°C |
| Tensile Strength (Mpa N/mm²) | 16 |
| Elongation at Break | 400% |
| Secant Modulus (N/mm²) | 130 |
| Maximum Longitudinal Change | ±5% |
| Flammability | Self Extinguishing (Except Trans) |
| Proof Voltage | 20kV/mm (min) |
| Fluid Resistance | Good Resistance to: Iso-Octane/Toulene |
Product Reference | ID as Supplied (min) | ID after Recovery (max) | Recovered Wall (nom) | MARKING | |
| SRM16 | 1.6 | 0.8 | 0.45 | ||
| SRM24 | 2.4 | 1.2 | 0.51 | ||
| SRM32 | 3.2 | 1.6 | 0.51 | ||
| SRM48 | 4.8 | 2.4 | 0.51 | ||
| SRM64 | 6.4 | 3.2 | 0.64 | ||
| SRM95 | 9.5 | 4.8 | 0.64 | ||
| SRM127 | 12.7 | 6.4 | 0.64 | ||
| SRM160 | 16.0 | 8.0 | 0.76 | ||
| SRM190 | 19.0 | 9.5 | 0.76 | ||
| SRM254 | 25.4 | 12.7 | 0.89 | ||
| SRM320 | 32.0 | 16.0 | 0.89 | ||
| SRM381 | 38.1 | 19.0 | 1.02 | ||
| SRM508 | 50.8 | 25.4 | 1.14 | ||
| SRM762 | 76.2 | 38.1 | 1.27 | ||
| SRM1016 | 101.6 | 50.8 | 1.40 |