Further properties
Shrink on
SNEP Cable Sleeves and Sleeving are usually shrink fitted using a heatgun, oven or shrink tunnel. If possible, select an 'Expanded I/D' large enough to achieve a good degree of recovery when shrunk.
SNEP Cable Sleeves and Sleeving has excellent flame and solvent properties and is not degraded by fluids and solvents found in normal ground support or military vehicle applications.
Black
Property | Value |
| Temperature Range | -70°C to 120°C (200°C for short periods) |
| Shrink Temperature | Optimum 115°C by hot air blower, shrink tunnel |
| Tensile Strength | 11,000 kNm ²min |
| Elongation At Break | 250% |
| Max Longitudinal Change | ±10% |
| Flammability | Self Extinguishing |
| Proof Voltage | 15kV per 1mm wall thickness |
| Secant Modulus | 100MPa Maximum |
| Heat Shock | +215°C x 4hrs. Pass. |
PRODUCT REFERENCE | EXPNADED DIMENSIONS I/D (MM) | INTERNAL DIAMETER MAX MM | WALL THICKNESS NOMINAL MM | COLOUR CODE | FORM |
| SNEP32 | 3.2 | 1.6 | 0.69 | BK = Black | Continuous sleeving |
| SNEP48 | 4.8 | 2.4 | 0.84 | Resistor Colour Coded | |
| SNEP64 | 6.4 | 3.2 | 0.90 | Kit Boxes | |
| SNEP95 | 9.5 | 4.8 | 1.0 | Kit Boxes | |
| SNEP127 | 12.7 | 6.4 | 1.2 | Kit Boxes | |
| SNEP160 | 16.0 | 8.0 | 1.3 | ||
| SNEP191 | 19.1 | 9.5 | 1.4 | ||
| SNEP254 | 25.4 | 12.7 | 1.8 | ||
| SNEP318 | 31.8 | 15.5 | 2.2 | ||
| SNEP380 | 38.0 | 19.0 | 2.4 | ||
| SNEP445 | 44.5 | 22.2 | 2.7 | ||
Many other standard and bespoke sizes available.