SL(50)P Silicone Cable Sleeve & Sleeving (SL(50)P)
Medical Grade Silicone (50 IRHD)
Main Attributes
- Zero halogen
- Self extinguishing
Further properties
- Hardness 50 IRHD
- WRC Approved Product
- High Tensile Strength and Elongation
- Good Tear Strength
- Brittle Point -65°C
Industry Standards:
- BS6920
Application Method
Push on / Stretch on
SL(50)P Cable Sleeves and Sleeving can be stretch fitted using a sleeving tool. Radial stretch while fitting is up to 2x nominal bore, when fitted up to 1.5 x nominal bore
BS6920: This material is a WRc approved product, listed by the Water Byelaws Scheme (Entry Number 9905528). For use with cold/hot water up to 85°c (Test report F24411,24412,24414,MA2415/V) This material also complies with FDA 21 CFR 177.260
Available Colours
White
Transparent
Property | Value |
| Temperature Range | -55°C to +180°C ,200°C Maximum |
| Compression Set | 25% |
| Tear Strength (Die B) | 24 N/mm |
| Tensile Strength | 8.3 MPa Average |
| Elongation at Break | 600% Average |
| Hardness | 50 IRHD |
| Brittle Point | -60°C |
| Halogen Content | Zero |
| Flammability | Self Extinguishing |
PRODUCT REFERENCE | NOMINAL BORE ID (MM) | NOMINAL WALL THICKNESS (MM) | LENGTH | COLOUR CODE | FORM |
| SL(50)P50/04 | 5.0 | 0.4 | Any length to | WE = White | Continuous sleeving |
| SL(50)P75/04 | 7.5 | 0.4 | nearest 0.5mm | TR = Transparent | Markers |
| SL(50)P127/04 | 12.7 | 0.4 | |||
| SL(50)P10/05 | 1.0 | 0.5 | |||
| SL(50)P15/05 | 1.5 | 0.5 | |||
| SL(50)P20/05 | 2.0 | 0.5 | |||
| SL(50)P30/10 | 3.0 | 1.0 | |||
| SL(50)P40/10 | 4.0 | 1.0 | |||
| SL(50)P50/10 | 5.0 | 1.0 | |||
| SL(50)P60/15 | 6.0 | 1.5 | |||
| SL(50)P70/20 | 7.0 | 2.0 | |||
| SL(50)P80/30 | 8.0 | 3.0 | |||
Many other standard and bespoke sizes available.
- Copyright 2003-2011 Siegrist-Orel - For High Performance Cable Identification and protection systems since 1934
- powered by seaPublish |